Topsoil Calculator

Estimate topsoil for lawn leveling, new turf and garden beds.

Your measurements

Order options

Your estimate

Live calculation
1.23yd³

Measured quantity · no extra allowance

Order volume33.33 ft³
Estimated weight1.36 US tons
Whole bags34 1 ft³

Calculation & all units

200 ft² × 2 in ÷ 324 × 1 = 1.23 yd³

Order volume
33.3333 ft³
Estimated weight
1.358 US tons
Whole bags
34 1 ft³
Area
200 ft²
Measured volume
1.2346 yd³
Metric volume
0.9439 m³
Metric mass
1,231.9793 kg
Volume-based truckloads
1 loads
Measurement planDimensions in feet
A dimension guide for your estimate
Estimate1.23 yd³View result

Calculation method

Use the average added depth across the area. Low spots may need separate measurements. Dry screened and damp topsoil have different weights, so a supplier density makes a tonnage estimate more useful.

Topsoil yd³ = area in ft² × added depth in inches ÷ 324.

A worked example

A 1,000 ft² lawn with a 0.5-inch layer needs 1.54 yd³ before allowance.

How to Use the Topsoil Calculator

Enter the surface area you intend to dress, level or cover. Enter the finished thickness of added topsoil. Measure low areas separately from a thin uniform layer when the site has noticeable depressions. Pick an estimated dry, screened or damp density, or enter the seller’s pounds per cubic yard in Order options. A bulk quote can be compared in yards or tons. For bags use their labeled cubic footage and round up once for the total. Where sod or seed is the next step, keep the topsoil estimate as its own line in the project list so you can price each stage separately.

Light Lawn Topdressing

Measure lawn sections and leave out paving, tree rings and planting beds. A 35 × 40 ft lawn has 1,400 ft². A quarter inch over that space takes about 1.08 yd³. If half the lawn only needs spot leveling, measure those spots rather than doubling the blanket thickness. Compare the height of grass and any recommendations for your turf before spreading. Topdressing is often planned as a sequence of thin applications, which keeps the amount per pass manageable. To reseed thin sections afterward, use the grass seed calculator with the labeled overseeding rate and measure just the zones that need seed.

Grading Before Sod

Check grade at paths, irrigation fixtures and drains. Estimate the height of the finished sod and soil together so the transition does not create a lip. For 720 ft² at an average of 2 inches, the topsoil layer is about 4.44 yd³. A low strip needing an extra inch across 90 ft² adds about 0.28 yd³. Save the strip and main layer as separate portions when recording the job. Use the sod calculator after determining the actual net turf area and use the supplier’s roll or pallet dimensions. The sod footprint can differ from the soil footprint where borders receive the same grade preparation.

Rebuilding a Bare Garden Strip

Set out the boundary and check whether the new soil needs to replace excavated soil or raise the grade. A 3 × 36 ft strip excavated 5 inches takes 45 ft³, or 1.67 yd³, to replace. If it also includes a planting pocket requiring a different mix, exclude that area and calculate the pocket separately. For deep holes or a grade change, plan the lower portion with the fill dirt calculator and calculate the specified topsoil cap here. Compare the texture of the screened topsoil with the existing ground and confirm how much loose volume the seller recommends delivering.

Topsoil Coverage, Weight and Bags

Depth and volume in the table are finished measurements. The 1 ft³ bag column assumes the package gives an actual volume, and rounds up for 100 ft². For weight, the screened topsoil estimate is 2,200 lb/yd³. Ask the supplier for the delivered weight when pricing wet material or planning multiple loads.

Depth Volume per 100 ft² 1 ft³ bags per 100 ft²
¼ in 2.08 ft³ 3
½ in 4.17 ft³ 5
1 in 8.33 ft³ 9
2 in 16.67 ft³ 17
4 in 33.33 ft³ 34

Planning Where the Soil Will Go

Draw a delivery and spreading sequence before choosing the drop point. A yard sold by a loader bucket may be quoted loose. A damp yard can also weigh more than a dry one even if both cover the same area. If you spread part of the delivery by wheelbarrow, fill to a repeatable level and count trips by zone. This is useful when the grade requires more material on one side than the other.

Common questions

How many tons is one yard of screened topsoil?

The calculator uses 2,200 lb per cubic yard for screened topsoil, or 1.10 US short tons. The dry and damp presets are 1.00 and 1.20 short tons per yard respectively. A soil yard’s delivered weight can change with organic content and moisture.

How much topsoil covers 1,000 square feet at one inch?

At one inch thick, the volume is 83.33 ft³, about 3.09 yd³. That means 84 one-cubic-foot bags before any allowance. For a bulk order, discuss minimum size and access for the drop instead of rounding directly to a truck count.

How much topsoil for lawn leveling?

Measure the area and the average depth to add. Use separate estimates for substantially deeper hollows.

Why does wet topsoil weigh more?

Water contributes to delivered mass. The density control allows you to use the value your supplier gives for the actual material.

Should I buy bags or bulk?

Compare the calculated bag count and bulk volume using local prices. Include delivery separately when comparing suppliers.

More bulk & landscape calculators

Browse full directory ↗

Your project list

Estimates saved on this device