Mulch Calculator

Work out mulch coverage and compare bagged and bulk quantities.

Your measurements

Order options

Your estimate

Live calculation
1.85yd³

Measured quantity · no extra allowance

Order volume50 ft³
Estimated weight0.65 US tons
Whole bags25 2 ft³

Calculation & all units

200 ft² × 3 in ÷ 324 × 1 = 1.85 yd³

Order volume
50 ft³
Estimated weight
0.6481 US tons
Whole bags
25 2 ft³
Area
200 ft²
Measured volume
1.8519 yd³
Metric volume
1.4158 m³
Metric mass
587.9901 kg
Volume-based truckloads
1 loads
Measurement planDimensions in feet
A dimension guide for your estimate
Estimate1.85 yd³View result

Calculation method

Measure only the area to cover. Subtract paths and large hardscape areas by using separate sections. Depth is the new layer to add, which can be thinner when topping up existing mulch. Keep mulch away from tree trunks according to the planting guidance you follow.

Bags = area × depth in inches ÷ 12 ÷ bag volume in ft³, rounded up.

A worked example

A 100 ft² bed at 3 inches requires 25 ft³. That is 13 bags of 2 ft³ before allowance.

How to Use the Mulch Calculator

Measure the footprint to cover and choose a rectangle, circle, triangle, or Known area. Enter the added depth above the prepared surface. For a bed that still has a usable layer, measure the difference between its present and desired thickness. Choose the mulch type if you need a weight estimate. Open Order options to enter the package size and compare whole bags with a bulk quote. Most bark and wood mulch bags are sold by volume. Use the printed cubic feet, and use the manufacturer’s yield if a block expands after opening.

Renewing an Existing Flower Bed

Check the old layer in several spots before deciding how much to buy. If a 140 ft² bed has an even 1 inch remaining and you plan to build up to 3 inches, the new layer takes about 23.33 ft³, or 12 bags of 2 ft³. Remove covered stepping stones and the open space required around stems. If only the outer band needs a refresh, measure that section as a distinct lower-volume order. Keep mulch and soil amendments separate. If you want to add organic matter to bare ground before covering it, estimate the amendment with the compost calculator and account for any change in grade.

Measuring Tree Rings

Use the inner and outer diameters to estimate a ring when the center must remain clear. A circle 10 ft across minus a 2 ft clear circle has about 75.40 ft². An added 2 inches is approximately 12.57 ft³ or seven bags of 2 ft³. Record the clear diameter separately so the spreader can see exactly where the mulch stops. Follow the tree’s planting guidance about keeping the root flare exposed. For five rings of the same size, multiply the unrounded volume by five before rounding to bags. Where rings overlap or arcs meet a walkway, subtract the covered portion of the walkway.

Covering a Long Sloped Border

Measure the surface receiving mulch along its slope for a layer specified perpendicular to the ground. A border 36 ft long with an actual sloped width of 5 ft covers about 180 ft². At 2½ inches deep it needs 37.5 ft³, or about 1.39 yd³. Measure terraces or sections with differing thickness separately. Check how the selected material behaves in runoff. A curved edge can be measured by adding rectangular and triangular pieces using the square yard calculator. If runoff routinely collects mulch at the bottom, look at the path of water before treating replacement volume as the whole solution.

Mulch Coverage for Common Bag Sizes

These figures use loose labeled cubic feet. At 3 inches, 2 ft³ covers 8 ft², so a 120 ft² bed uses 15 bags before extra material. Keep an extra bag separately if you will touch up later. For bulk pickup verify the weight per yard as well as volume.

Added depth Coverage per yd³ Coverage per 2 ft³ bag Coverage per 3 ft³ bag
1 in 324 ft² 24 ft² 36 ft²
2 in 162 ft² 12 ft² 18 ft²
3 in 108 ft² 8 ft² 12 ft²
4 in 81 ft² 6 ft² 9 ft²

Comparing Mulch Packaged in Liters

Divide liters by about 28.32 to convert to cubic feet. A 56 L bag contains roughly 1.98 ft³. For a large order, use the unrounded conversion when counting bags. A bundle of twenty such bags contains slightly less than forty cubic feet. Before comparing prices, check whether a compressed product lists its volume after loosening.

Common questions

How much does a cubic yard of shredded wood mulch weigh?

At the planning value of 700 lb/yd³, one yard weighs 0.35 US short tons. Different types or moisture levels can change weight considerably. Use the label or vendor quote if the bags are sold by weight or you are planning transport.

How many bags of mulch cover a 200 sq ft bed at three inches?

A 3-inch layer needs 50 ft³. That is 25 bags at 2 ft³ or 17 bags at 3 ft³. Compare full purchase quantities if stores have different unit prices, and use the actual volume printed on the packages.

How many bags are in a cubic yard?

A cubic yard holds 27 ft³, so it takes 14 whole 2-ft³ bags to meet or exceed that volume.

How much does one yard cover?

At 3 inches deep, one cubic yard covers 108 ft². At 2 inches it covers 162 ft².

Can I compare a bag price with bulk delivery?

Use the order options to switch the price unit. Add delivery or tax separately to your material estimate.

More bulk & landscape calculators

Browse full directory ↗

Your project list

Estimates saved on this device