Firewood Cord Calculator

Convert a neatly stacked woodpile into full cords, face cords and cubic feet.

Your measurements

Order options

Your estimate

Live calculation
0.33full cords

For neatly stacked wood

Stack volume42.67 ft³
Face cords at this log length1 face cords
Metric volume1.21 m³

Calculation & all units

8 × 4 × 1.33 ft × 1 ÷ 128

Stack volume
42.6667 ft³
Face cords at this log length
1 face cords
Metric volume
1.2082 m³
Measurement planDimensions in feet
A dimension guide for your estimate
Estimate0.33 full cordsView result

Calculation method

Measure the outside dimensions of a neatly stacked pile, including ordinary spaces between pieces. A full cord is 128 ft³. A face cord uses an 8 × 4 ft face with the actual log length you enter. Loose thrown loads have different packing and require a separate conversion.

Full cords = stack length × stack height × log length in feet × number of stacks ÷ 128.

A worked example

An 8 × 4 ft stack of 16-inch logs contains 42.67 ft³, equal to one third of a full cord.

How to Use the Firewood Cord Calculator

Measure a neatly stacked row from end to end and from its base to the typical height of the wood. Enter the depth using the average actual log length if all pieces run in a single row. For multiple adjacent rows with different depths or heights, calculate each separately. Enter the count in Order options only when stacks share the same dimensions. The result gives full cords based on 128 stacked cubic feet, including normal spaces between pieces. Use the full-cord price input when the seller quotes that unit. Ask for the actual stacked dimensions when a listing uses a name such as face cord or rack.

Checking a Delivered Single Row

Restack the delivery or measure the stack as delivered when checking a stacked-volume quote. A row 12 ft long, 4 ft high and made of 16-inch pieces has 64 stacked ft³, or half a full cord. Take an average height if the top row slopes. Leave out empty space at the ends, pallets below the first row and large gaps between separate piles. Compare the result with the stated stacked dimensions on the receipt. For sellers who use cubic yards, the cubic feet to cubic yards converter can express the same stacked 64 ft³ as about 2.37 yd³.

Planning a Rack or Woodshed

Measure the usable space after accounting for access and any interior supports. An 8 ft rack stacked 5 ft high with a single row of 16-inch pieces holds about 53.33 ft³, or 0.42 cord. Two matching rows hold about 0.83 cord if both can be stacked to those dimensions. Keep shelves measured independently when one side is shorter or the floor steps. A shed plan may also need floor coverage or an access mat. Use the square yard calculator for that footprint. Width used to walk between rows should stay out of the wood volume.

Comparing Sellers with Different Piece Lengths

A nominal 4 × 8 ft face can represent very different deliveries. With 12-inch pieces its depth is one foot and the stack is 32 ft³. At 20 inches it is about 53.33 ft³. Divide each quote by the calculated fraction of a full cord to obtain a comparable price per full cord. A $110 half-cord would be $220 per full cord at the same rate. Consider species, seasoning and delivery separately because the volume comparison alone cannot reflect moisture content or heat output. Confirm the individual log length if it matters for the size of your stove or fireplace.

Full Cord Fractions for a 4 × 8 ft Face

The table treats one row as neatly stacked and evenly filled. Measure the actual log length in a representative sample. A face cord is often described by this size of face, but its volume depends on depth.

Average log length Stacked cubic feet Fraction of full cord
12 in 32.00 0.250
16 in 42.67 0.333
18 in 48.00 0.375
20 in 53.33 0.417
24 in 64.00 0.500

Common questions

How many 16-inch face cords make a full cord?

Three matching rows that are each 4 ft high and 8 ft long with 16-inch pieces total 128 stacked ft³. This equality depends on those dimensions. Two vendors may offer a face stack with different piece lengths.

How should I estimate a stack with a sloping top?

For a steady slope, average its high and low heights. A stack that goes from 3 to 5 ft has a representative 4 ft height. For uneven piles, divide the length into sections and take an average height for each. Use the straight length of each section in its estimate.

Can I compare prices for a quarter cord and a half cord?

Divide each price by its fraction of a full cord. For a $65 quarter cord, that gives an equivalent $260 per full cord. The same arithmetic works for 0.5 cord or a measured nonstandard fraction. Keep delivery fees as a separate line when comparing quotes.

How large is a full cord?

A full cord is 128 cubic feet of stacked firewood, commonly arranged as 8 × 4 × 4 feet.

How much is a face cord?

Its volume depends on log length. An 8 × 4 ft face with 16-inch logs is one third of a full cord. Confirm the seller’s unit.

Can I use this for a loose truckload?

Measure stacked wood for this calculation. Loose loads pack differently, so the outside truck dimensions alone do not establish stacked cords.

More bulk & landscape calculators

Browse full directory ↗

Your project list

Estimates saved on this device