Cubic Feet to Cubic Yards Converter

Convert volume between cubic feet, cubic yards and cubic meters.

Your measurements

Order options

Your estimate

Live calculation
2yd³

1 yd³ = 27 ft³ exactly

Cubic feet54 ft³
Cubic meters1.53 m³

Calculation & all units

54 ft³ ÷ 27

Cubic feet
54 ft³
Cubic meters
1.5291 m³
Measurement planDimensions in feet
A dimension guide for your estimate
Estimate2 yd³View result

Calculation method

Use this converter when you already have a volume. If you have length, width and depth, use the Cubic Yard calculator. Unit changes preserve the physical volume you entered.

Cubic yards = cubic feet ÷ 27. Cubic meters = cubic feet × 0.028316846592.

A worked example

54 ft³ equals exactly 2 yd³, or approximately 1.529 m³.

How to Use the Cubic Feet to Cubic Yards Converter

Enter a volume that you already know, then choose its current unit. Cubic feet, cubic yards and cubic meters are supported. The result shows cubic yards and the matching amounts in other units. If you only know length, width and depth, calculate volume first with the cubic yard calculator. If all you have is area, get the thickness before attempting a conversion. For a series of volumes in different units, convert them to a common unit before adding them. Copy the result to preserve the unit and keep more precision for small partial-yard orders.

Adding Bags to a Bulk Order

If you have six bags that each contain 2 ft³, their combined volume is 12 ft³, or about 0.444 yd³. If the project calls for 2 yd³, there are 42 ft³ or about 1.556 yd³ still to buy after accounting for the bags. Use the label’s actual volume rather than the package dimensions. If a bag gives pounds and a measured yield, use its yield to do the subtraction. If it gives just weight, you need density as a separate fact. The mulch calculator can estimate the remaining depth and compare different bags when there is already some mulch in the bed.

Using Measured Cart or Container Loads

A cart that holds a verified 5 ft³ per usable load moves 135 ft³ in 27 trips. That total is exactly 5 yd³. The volume relation works for soil, stone or sand, but weight can limit how much fits in a practical load. Check the usable capacity with the material you are handling and account for partially full trips. If you measured the inside volume of a bin, use the fill line that the job will actually reach. For a seller’s estimate in units of half or quarter yards, convert the unrounded cart total and discuss the supplier’s increments.

Converting a Quantity From a Metric Plan

Suppose a specification calls for 3 m³ of material delivered. That represents about 105.94 ft³ or 3.924 yd³, so a whole-yard quote might start at 4 yd³. Before ordering, check if the plan calls for a finished compacted volume. That specification changes the purchase quantity by the known placement factor, independent of unit conversion. Record both the original and converted number so a load can be compared to the specification. Use the paver base calculator if you must estimate separate base and bedding layers from the site’s original measurements.

Cubic Feet to Cubic Yards Reference

One cubic yard is a cube three feet on each side, so it contains 3 × 3 × 3 = 27 ft³. The reciprocal conversion multiplies yards by 27. Convert before rounding. Four exact quarter-yard orders add to one yard even if the equivalent cubic feet are displayed with a shorter decimal.

Cubic feet Cubic yards Typical comparison
6.75 0.25 Quarter yard
13.5 0.5 Half yard
20.25 0.75 Three quarter yard
27 1 One yard
54 2 Two yards
81 3 Three yards

Working With Supplier Rounding

If a volume quote is rounded to the nearest quarter yard, ask whether a quoted 1.5 yd³ comes from a standard loader measure or a rounded price calculation. Keep the unrounded cubic feet in the project notes. This makes it easier to compare orders when a supplier quotes in bags and another sells by volume. Add waste allowances before converting to whole purchase units.

Common questions

What is 100 cubic feet in cubic yards?

Divide 100 by 27. The equivalent is about 3.7037 yd³. If a vendor quotes quarter-yard increments, compare that exact figure with 3.75 yd³. Whether to round up depends on how much you must have on hand.

How many cubic yards is a 32-cubic-foot raised bed?

Its internal capacity is about 1.1852 yd³. If you fill it short of the rim, use the volume up to that line. Two such full beds take 64 ft³ or about 2.37 yd³.

How can I convert cubic inches without losing precision?

Divide cubic inches by 46,656, the quantity in a cube 36 inches on a side. Alternatively divide by 1,728 for cubic feet, then by 27 for cubic yards. Retain the full intermediate value before comparing with a purchase size.

How do I convert cubic yards back to feet?

Multiply cubic yards by 27. You can change the input unit to yd³ for the reverse conversion.

Do I multiply each side by three?

A yard is three feet in each dimension, so a cubic yard is 3 × 3 × 3 = 27 cubic feet.

Can this tell me the weight?

Volume alone does not determine weight. Use a material calculator and its density to estimate mass.

More bulk & landscape calculators

Browse full directory ↗

Your project list

Estimates saved on this device