Cubic Yard Calculator

Calculate cubic yards from dimensions or a known area, with mixed units.

Your measurements

Order options

Your estimate

Live calculation
2.47yd³

Measured quantity · no extra allowance

Order volume66.67 ft³
Estimated weight3.46 US tons
Whole bags134 0.5 ft³

Calculation & all units

200 ft² × 4 in ÷ 324 × 1 = 2.47 yd³

Order volume
66.6667 ft³
Estimated weight
3.4568 US tons
Whole bags
134 0.5 ft³
Area
200 ft²
Measured volume
2.4691 yd³
Metric volume
1.8878 m³
Metric mass
3,135.9472 kg
Volume-based truckloads
1 loads
Measurement planDimensions in feet
A dimension guide for your estimate
Estimate2.47 yd³View result

Calculation method

A cubic yard is a volume of 27 cubic feet. The calculator converts each dimension to feet before multiplying, so length in feet and depth in inches work together. Weight requires a separate density assumption.

yd³ = ft³ ÷ 27. For area in ft² and depth in inches, yd³ = area × depth ÷ 324.

A worked example

A 9 × 9 ft area at 4 inches contains exactly 1 yd³ before allowance.

How to Use the Cubic Yard Calculator

Enter a footprint and a layer depth to estimate a three-dimensional quantity. For a rectangular bed, type its length and width. Choose Circle for a tank or island measured by diameter. Use a triangle’s base and perpendicular height, or enter Known area when you have already measured the square footage. The depth input has its own unit, so you can put in feet for the footprint and inches for the layer. Read cubic yards for an order by volume. Choose a material for the optional weight comparison. If you know cubic feet already, the dedicated cubic feet to cubic yards converter is quicker.

Shallow Layers Over Large Areas

A driveway, ground cover or topdressing can cover a large area while taking relatively little depth. For 480 ft² covered 3 inches thick, convert 3 inches to 0.25 ft. Multiplying gives 120 ft³, or 4.44 yd³. A common estimating mistake is using 3 as though it were feet, which gives a volume twelve times too large. If the supplier uses a quote per ton, pass the required volume to the gravel calculator with the actual density and the chosen allowance. Measure the finished footprint of each material so that decorative gravel and structural base are priced as separate layers.

Raised Beds, Boxes and Small Batches

A rectangular box 2 ft wide, 6 ft long and 16 inches deep has a capacity of 16 ft³, about 0.59 yd³. Three such boxes take 48 ft³, about 1.78 yd³. At 2 ft³ per bag, the total is 24 bags. Use internal measurements, and deduct space above the fill line. Material placed in the bottom for a separate purpose reduces the available space but should have its own estimate. Use the soil calculator if the job needs a comparison between loose garden mix and bagged potting soil. Its starting densities reflect common soil choices for planning.

Sloping Fill and Different Layer Depths

For a rectangular patch with a consistent slope through its thickness, the average of the shallow and deep ends represents a simple wedge. A 10 × 24 ft patch rising from 2 inches to 8 inches needs 5 inches on average. Its finished fill is 100 ft³, or 3.70 yd³. Where an uneven cut has several deep spots, take more measurements and break it into areas with similar depths. Volume estimates add directly if you keep the same units. Record a loose delivery allowance separately from the surveyed finished quantity. The fill dirt calculator handles that comparison for fill placed to grade.

Volume and Coverage Reference

Each row represents the same cubic yard spread to a different uniform thickness. The last column helps check quantities for a yard that quotes fractional loads. Order rounding happens after the measured volume and any allowance. For separately packaged colors or grades, round each order line on its own.

Thickness Coverage per yd³ Yards for 100 ft²
½ in 648 ft² 0.154
1 in 324 ft² 0.309
2 in 162 ft² 0.617
4 in 81 ft² 1.235
6 in 54 ft² 1.852
12 in 27 ft² 3.704

Common questions

How many cubic yards are in a 10 × 20 ft area at 4 inches deep?

The volume is 200 × 4 ÷ 324, or about 2.47 yd³. That is 66.67 ft³. A five percent addition takes the order to about 2.59 yd³ before any rounding at the yard.

How many 2 cubic foot bags make a cubic yard?

One cubic yard equals 27 ft³, or 13.5 bags when each contains 2 ft³. Buy 14 whole bags to reach at least one yard. A 3 yd³ order uses 41 bags at the same size. Round once after totaling the job.

Can I multiply length, width and depth given in inches?

Yes. That produces cubic inches. Divide the result by 46,656 to get cubic yards because one yard measures 36 inches on each of three sides. The calculator can handle the unit conversions if you enter the original measurements.

Can I convert square feet directly to cubic yards?

You also need a depth. Multiply square feet by depth in inches and divide by 324.

How many cubic feet are in a yard?

One cubic yard equals exactly 27 cubic feet.

How do I convert yards to tons?

Multiply cubic yards by the material bulk density in lb/yd³, then divide by 2,000 for US short tons.

More bulk & landscape calculators

Browse full directory ↗

Your project list

Estimates saved on this device