Soil Calculator

Calculate soil for raised beds, gardens and planters in cubic yards and bags.

Your measurements

Order options

Your estimate

Live calculation
1.19yd³

Measured quantity · no extra allowance

Order volume32 ft³
Estimated weight1.07 US tons
Whole bags16 2 ft³

Calculation & all units

32 ft² × 12 in ÷ 324 × 1 = 1.19 yd³

Order volume
32 ft³
Estimated weight
1.0667 US tons
Whole bags
16 2 ft³
Area
32 ft²
Measured volume
1.1852 yd³
Metric volume
0.9061 m³
Metric mass
967.6637 kg
Volume-based truckloads
1 loads
Measurement planDimensions in feet
A dimension guide for your estimate
Estimate1.19 yd³View result

Calculation method

Measure the inside of the bed and the depth you will actually fill. For several identical beds, change the quantity. Potting mix, topsoil and compost blends have different densities. Bag volume is usually the most useful purchasing unit for planters.

Soil in ft³ = inside length × inside width × fill depth in feet × number of beds.

A worked example

A 4 × 8 ft raised bed filled 12 inches deep needs 32 ft³ or 1.19 yd³. That is 16 bags at 2 ft³ each before allowance.

How to Use the Soil Calculator

Enter the inside length and width of a bed, or choose Circle for a round planter. Use the fill depth from the bed floor or existing soil surface to the desired soil line. If your planter tapers sharply, use an average cross section or the manufacturer’s capacity. Select the mix you want to order and enter the seller’s density if the quote uses pounds or tons. Check Order options for bag volume, repeated beds and price. Packaged soil usually lists volume. Enter the figure from the bag instead of assuming that bags with the same outside dimensions contain the same quantity.

Filling New Raised Beds

For a 4 × 8 ft bed with 12 inches of clear internal depth, filling to 2 inches below the rim leaves 10 inches of soil depth. That is 26.67 ft³. Three identical beds therefore take 80 ft³, or about 2.96 yd³. Measure the space inside the retaining boards, especially if the advertised dimensions include thick corner posts. Enter the number of matching beds before rounding to bags so the surplus from one bag can go into the next bed. If the beds will also receive a surface cover, calculate it with the mulch calculator and check the combined soil and mulch heights against the rim.

Topping Up Settled Vegetable Beds

Stretch a line across the intended fill level and measure down to the existing surface in several spots. If a 30 ft² bed only needs an average of 2 inches added, buy about 5 ft³ before any allowance. An uneven bed might benefit from grouping low patches separately instead of using one average across the entire row. Consider how amendments will be incorporated. To mix compost into the existing soil at a planned rate, use the compost calculator and enter the thickness of compost itself. Filling two inches of depth entirely with garden mix differs from adding a portion of compost to the lower layer. Save each order line by material.

Measuring Containers and Round Planters

A cylindrical planter with a 24-inch inside diameter and 15 inches of usable fill depth holds about 3.93 ft³. A planter with a narrow base takes less than the cylinder of its upper diameter. If you know the dimensions at both ends and the walls slope evenly, use the volume of a circular frustum or a published container capacity. For a mix sold in liters, convert the total cubic feet at about 28.32 liters per ft³. A pair of those straight-sided planters would take about 222 liters. A potting mix can weigh substantially less per cubic foot than screened topsoil.

Soil Bags for a 4 × 8 ft Bed

These counts assume 2 ft³ bags and round once per row. Depth is the usable fill depth. For a bulk order, ask about minimum quantities and the clearance needed for the delivery.

Fill depth Soil volume 2 ft³ bags
6 in 16 ft³ 8
8 in 21.33 ft³ 11
10 in 26.67 ft³ 14
12 in 32 ft³ 16
18 in 48 ft³ 24

Measuring a Mix Ratio Before Filling

If a supplier offers a specified blend, order its full volume as one product. When blending separately by volume, measure each ingredient with the same container and track its proportion in the batch. For example, allocating one-quarter of 32 ft³ to one component gives 8 ft³. Keep that separate from the top layer so the total fill height is easy to check.

Common questions

How many yards of soil do I need for two 4 × 8 ft raised beds?

At 12 inches of soil depth each bed takes 32 ft³. The two beds total 64 ft³ or about 2.37 yd³ before any extra. That equals 32 bags of 2 ft³ each. Measure the inside dimensions and leave space for any intended surface layer.

How much does a cubic yard of garden soil weigh?

The garden soil preset is 1,800 lb, or 0.90 US short tons, per cubic yard. Screened topsoil at the 2,200 lb preset weighs 1.10 short tons per yard. Ask for the delivered mix’s weight if it will go in a trailer or be handled in bags.

How many bags fill a 4 × 8 raised bed?

At a 12-inch fill depth, use 16 bags of 2 ft³. At 6 inches, use 8 bags. Account for any existing soil before measuring the required fill.

Can I calculate several planters?

Enter the dimensions of one planter and set Quantity in Order options. For different sizes, save each estimate to your project list.

How much compost should I mix in?

The right blend depends on the crop and existing soil. Calculate the total volume first, then use the blend proportion recommended for your garden.

More bulk & landscape calculators

Browse full directory ↗

Your project list

Estimates saved on this device