Calculation method
Use actual paver dimensions or the coverage dimensions specified by the manufacturer. The estimate adds your selected cutting waste and rounds up to whole pavers. Base and bedding outputs use the separate layer depths entered in the options.
A worked example
A 100 ft² patio with 4 × 8 inch pavers uses 450 pavers before waste, or 473 with 5% waste.
How to Use the Paver Calculator
Measure the finished paved area, including separate rectangular landings that use the same paver. Exclude steps, planting pockets or other surfaces that will be purchased separately. Enter the paver’s length and width. Use the installed module dimensions if the manufacturer publishes them, or take the pack’s stated area coverage when that is the basis of the quote. Check Order options for waste, pieces per pallet, base depth and bedding depth. The calculator gives a whole-piece estimate. Use the pallet result as an alternative purchase quantity and check whether the seller will split pallets or sell extra individual pieces.
A Rectangular Patio in Running Bond
A 14 × 18 ft patio has 252 ft². At 32 in² per installed module for a 4 × 8 in paver, the geometric estimate is 1,134 units before extra material. A 5% addition rounds to 1,191 units. Check row dimensions against the proposed pattern before ordering and look at both opposite edges. Shifting the layout can help avoid very narrow strips. A colored soldier course or another edge treatment needs its own count by linear run. For the aggregate under the patio, measure its actual footprint and use the paver base calculator with the planned thickness and bedding layer.
A Curved Walk with Cut Edges
Take the walk’s area from a layout or approximate it in sections. A centerline measurement can work for a wide, gentle curve of consistent width. For tighter bends and variable widths, use measured shapes or Known area. For a 3 ft wide walk with a 44 ft centerline, estimate 132 ft². An installed module of 6 × 9 inches then gives a geometric estimate of 352 pieces. A 10% allowance rounds that to 388. Record which pieces can be reused at the other edge and where the final course needs full units. Use the paver sand calculator for compatible joint fill.
Staging a Large Driveway Paver Order
Break a long drive into rectangular working zones to check the takeoff. Estimate the combined square footage and compare the pack coverage, because opening an additional full pallet for a small remainder can change the delivered price. If one pack covers 105 ft² and the adjusted driveway is 830 ft², eight packs give 840 ft². Ask about shade variation and how to blend pieces from different pallets. Where the installation calls for a thicker or different base than the adjoining walk, plan its aggregate separately. Use the crushed stone calculator to translate the specified base volume into a delivery weight.
Paver Size and Pieces per Square Foot
These figures use the stated dimensions as installed modules. Illustrative 100 ft² pieces round up. For a product sold by packaged area, the label can incorporate spacers and mixed patterns that a single nominal rectangle does not represent.
| Installed module | Pieces per ft² | Pieces for 100 ft² before extra |
|---|---|---|
| 4 × 8 in | 4.5 | 450 |
| 6 × 6 in | 4 | 400 |
| 6 × 9 in | 2.67 | 267 |
| 8 × 8 in | 2.25 | 225 |
| 12 × 12 in | 1 | 100 |
Common questions
How many 4 × 8 pavers are needed for 200 square feet?
At 4.5 pieces per square foot, a 200 ft² area uses 900 pavers before cutting allowance. Add 5% for an estimate of 945 pieces. A product with a different installed module or published pack size can change that count.
How many pallets of pavers do I need?
Divide the final whole-piece quantity by the number supplied on a pallet and round up if pallets are the only purchase unit. For 945 pavers and 500 per pallet, buy two pallets. If the supplier sells pieces separately, compare one pallet plus 445 pieces.
Do I count the joint width in the paver size?
Use the installed module if the supplier supplies one. It typically describes how much repeated layout space a unit occupies in the intended installation. If the pack gives rated square footage for its pattern, that coverage is the most direct input for purchasing mixed units.
Does this work for mixed-size paver packs?
For mixed packs, use the manufacturer coverage per pack as the basis for ordering. This tool counts identical rectangular units.
How much waste should I allow?
Straight layouts and complex patterns have different cutting losses. Enter a percentage appropriate to your layout and supplier guidance.
Are sand and gravel included?
The detailed result estimates both layers from the depths you enter. Use Paver Base for an additional gravel compaction allowance.