Pea Gravel Calculator

Find pea gravel quantities for patios, paths and drainage areas.

Your measurements

Order options

Your estimate

Live calculation
1.23yd³

Measured quantity · no extra allowance

Order volume33.33 ft³
Estimated weight1.6 US tons
Whole bags67 0.5 ft³

Calculation & all units

200 ft² × 2 in ÷ 324 × 1 = 1.23 yd³

Order volume
33.3333 ft³
Estimated weight
1.6049 US tons
Whole bags
67 0.5 ft³
Area
200 ft²
Measured volume
1.2346 yd³
Metric volume
0.9439 m³
Metric mass
1,455.9755 kg
Volume-based truckloads
1 loads
Measurement planDimensions in feet
A dimension guide for your estimate
Estimate1.23 yd³View result

Calculation method

Pea gravel is rounded and remains loose underfoot. Measure the contained area within edging. The default density is an estimating assumption, which you can replace with your supplier’s figure.

Order volume = measured volume × (1 + allowance ÷ 100). Bags = order volume in ft³ ÷ bag volume, rounded up.

A worked example

A 12 × 10 ft patio at 2 inches needs 0.74 yd³ before allowance, equivalent to 40 half-cubic-foot bags.

How to Use the Pea Gravel Calculator

Use the inside-to-inside width of your edging and measure the total footprint. For a winding path with a fairly constant width, enter the centerline length and average width as a rectangle. Calculate junctions and wider seating areas as separate rectangles or known areas. Enter the depth of the loose finish you plan to spread over the prepared surface. The default density is 2,600 lb per cubic yard. Change it if the supplier has a different figure for your washed gravel. Under Order options, set the bag size or price basis. The result gives you treated volume, estimated scale weight and a count of whole bags.

Garden Paths with Edging

Mark the inside edge of the walk with string or a hose before taking measurements. A 4 ft wide path with a measured centerline length of 28 ft has a footprint of about 112 ft² if it has no sharp width changes. At 2 inches thick the finish needs about 18.67 ft³, or 0.69 yd³. A sharply bent corner or a flare at a gate should have its own measured area. Consider how an edging transition meets a lawn or solid walkway so the surface stays at the intended height. Estimate the underlying compacted layer independently with the crushed stone calculator if your path design includes one.

Seating Pads Around a Fire Pit

Use the inner and outer diameters for a circular ring. A 14 ft outer diameter has an area of about 154 ft². A 4 ft diameter fixed center feature removes about 12.57 ft², leaving 141.37 ft² for the finish. At 2 inches, the ring takes about 23.56 ft³, or 0.87 yd³. Enter that net area in the calculator. For a patio built from pieces of different materials, outline each with stakes and record separate surface totals. Use the paver calculator if part of the pad is a paved landing. Follow the fire feature supplier’s material and clearance requirements when selecting rock close to the heat source.

Narrow Borders and Stepping Stones

For a 24 ft run with a 15-inch inner width, use a mixed-unit measurement or enter 30 ft² directly. If the border also contains seven 1 ft² stepping stones and they take up the full gravel depth, subtract their 7 ft² of footprint. The remaining 23 ft² needs about 3.83 ft³ at 2 inches, which rounds up to eight half-cubic-foot bags. If the stones sit over a common bedding layer, keep the full area for bedding and subtract the footprints only for the surrounding finish. Save that distinction in separate estimates so a quote for the larger base cannot be mistaken for the decorative material order.

Pea Gravel Bag and Depth Guide

These depths show how coverage changes with quantity. Confirm the proposed depth with the supplier, especially where you need a firm walking surface or a fine gravel finish held within an edging system.

Depth Coverage per 0.5 ft³ bag Coverage per cubic yard
1½ in 4 ft² 216 ft²
2 in 3 ft² 162 ft²
2½ in 2.4 ft² 129.6 ft²
3 in 2 ft² 108 ft²

Matching Gravel Across Deliveries

Take a product sample to the project before ordering all the stone. Color and size can look different once washed and spread. For a second delivery, ask whether it comes from the same stockpile and blend material at the transition. Gravel used for the same finish should go into one total before bag rounding, but separate contrasting grades into independently measured orders.

Common questions

How many bags of pea gravel cover 100 square feet?

At two inches, 100 ft² takes 16.67 ft³. A half-cubic-foot bag covers 3 ft² at that depth, so you need 34 bags before extra material. At three inches the same area needs 25 ft³, or 50 bags.

How many tons are in a yard of pea gravel?

At the planning density of 2,600 lb/yd³, a cubic yard weighs 1.30 US short tons. If your yard sells pea gravel by weight, divide the estimated cubic yards multiplied by the quoted density by 2,000. The package count is rounded separately.

What depth should I enter?

Use the depth required by your project design. The patio and path presets are quick starting values that you can edit.

Is pea gravel the same as crushed stone?

Pea gravel has rounded particles. Angular crushed stone behaves differently when compacted. Select the calculator and density that match your order.

Do I need extra material?

An allowance can cover small measurement errors and handling losses. Enter the percentage agreed with your supplier.

More bulk & landscape calculators

Browse full directory ↗

Your project list

Estimates saved on this device