Calculation method
Choose a grass type and planting mode to set an example rate, then replace it with the rate printed on your seed label. Mixtures, coated seed and local conditions can require different rates. The net area excludes the area you enter as hardscape.
A worked example
A 2,000 ft² lawn at 8 lb per 1,000 ft² uses 16 lb of seed. A 20 lb bag is sufficient before any optional allowance.
How to Use the Grass Seed Calculator
Measure the turf footprint and exclude planting beds, bare paths, paving and other areas that will not receive seed. Choose the grass type and whether you are starting a lawn or overseeding. Then replace the suggested rate with the application rate on your seed label. Keep the unit in pounds per 1,000 square feet. If the label uses pounds per acre, divide by 43.56 first. Set the actual package weight in Order options, along with any optional allowance for handling. Read both the pounds to apply and the whole-bag purchase count. A leftover partial bag is useful for later touch-up.
Seeding a Whole New Lawn
Measure the soil area after grading and mark sections around new sidewalks and beds. For a 3,800 ft² footprint with 300 ft² excluded, the net area is 3,500 ft². A labeled new-lawn rate of 7 lb per 1,000 ft² uses 24.5 lb. If available bags hold 10 lb, the purchase becomes three bags, but spread 24.5 lb at the specified rate. Weigh the portion for each measured section before loading the spreader to reduce uneven application. Use the topsoil calculator if grade preparation needs a separate soil delivery. Recheck the net area after edges have been set.
Overseeding Thin Turf
A lawn can have a few damaged areas and a larger area where existing turf only needs a light overseed. Measure the two treatments separately if you will apply different rates. For 2,400 ft² at 4 lb per 1,000 ft², the total is 9.6 lb. A nearby 400 ft² bare patch at 8 lb per 1,000 ft² needs 3.2 lb. Combine the measured weights only if the same product suits both areas. A more uniform initial soil surface can make spreading easier. If the renovation plan calls for a light organic topdressing, estimate that independently with the compost calculator.
Shopping for Seed on a Large Lot
Map the portions receiving seed before buying a bag sized for the parcel’s total acreage. A half-acre lot has 21,780 ft², but a house, driveway and garden can leave substantially less turf. If mapping gives 15,000 ft² and your label calls for 5 lb per 1,000 ft², the project uses 75 lb. That fits three 25 lb bags. When comparing bags, note whether a coverage claim is for new lawns or overseeding, and use the rate for your task. For a strip where you plan to install rolls instead, use the sod calculator and exclude it from the seed total.
Seed Rates and Package Counts
These rates illustrate the arithmetic. Follow the selected product’s label and its instructions for preparing and maintaining the site. In this table a 3,000 ft² lawn uses the measured weight, with package counts rounded to complete 10 lb bags.
| Label rate per 1,000 ft² | Seed for 3,000 ft² | 10 lb bags |
|---|---|---|
| 2 lb | 6 lb | 1 |
| 4 lb | 12 lb | 2 |
| 6 lb | 18 lb | 2 |
| 8 lb | 24 lb | 3 |
| 10 lb | 30 lb | 3 |
Common questions
How many bags of grass seed cover 5,000 square feet?
At a label rate of 6 lb per 1,000 ft², the lawn needs 30 lb. That means three 10 lb bags or two 20 lb bags. Compare the price of both full orders. Apply the calculated weight even when the package total is larger.
How do I convert a rate of 200 lb per acre?
One acre is 43,560 ft², so divide 200 by 43.56. This gives approximately 4.59 lb per 1,000 ft². For a measured 6,000 ft² you would need about 27.55 lb at the original rate.
Does a seed blend need a separate calculation for each species?
A packaged blend usually gives a rate for the whole mix. Use that rate. If you are buying individual seed types to make a custom blend, use the recipe’s actual quantity for each one and round those purchases separately.
How much seed for one acre?
An acre is 43,560 ft². Multiply the label rate per 1,000 ft² by 43.56.
Is overseeding different from a new lawn?
Overseeding rates are often lower. Select the mode and then check the product label for the actual rate.
Does coated seed need a different rate?
It may. Use the rate printed for that exact product, including any coating.