Gravel & Bulk Material Calculator

Estimate gravel, sand, soil, mulch and stone in cubic yards, tons or bags.

Your measurements

Order options

Your estimate

Live calculation
2.47yd³

Measured quantity · no extra allowance

Order volume66.67 ft³
Estimated weight3.46 US tons
Whole bags134 0.5 ft³

Calculation & all units

200 ft² × 4 in ÷ 324 × 1 = 2.47 yd³

Order volume
66.6667 ft³
Estimated weight
3.4568 US tons
Whole bags
134 0.5 ft³
Area
200 ft²
Measured volume
2.4691 yd³
Metric volume
1.8878 m³
Metric mass
3,135.9472 kg
Volume-based truckloads
1 loads
Measurement planDimensions in feet
A dimension guide for your estimate
Estimate2.47 yd³View result

How to Use the Bulk Material Calculator

Measure the area you intend to cover and decide how thick the finished layer should be. Choose Rectangle, Circle, Triangle, or Known Area. Enter a diameter for a circle or a base and perpendicular height for a triangle. You can mix feet and inches, so a 20-foot length and 4-inch depth can go in as measured. Choose the material to estimate its weight. The same footprint and depth require the same volume of mulch or stone, but the delivery weights are very different.

Open Order options to enter the supplier’s bulk density, select a bag size in cubic feet or pounds, or add extra material. Use the results card to compare cubic yards, short tons and whole bags. Copy gives you the estimate as text. Save to project keeps it in the browser alongside other estimates, which is useful when one job needs several materials. Save each layer separately so the shopping list says what each quantity is for.

For an area in square feet and a depth in inches, multiply area by depth and divide by 324. There are 12 inches per foot and 27 cubic feet per cubic yard. A 9 × 9 ft patch at 4 inches takes exactly 1 yd³. At 2,800 lb/yd³ that is 2,800 lb, or 1.4 US short tons. Five percent extra would make the volume 1.05 yd³ before supplier rounding.

Driveway Gravel

Measure the drive in sections if it widens at the garage or has a turning pad. A 12 × 40 ft rectangle at a finished depth of 4 inches takes about 5.93 yd³. A separate 12 × 10 ft pad at the same depth takes 1.48 yd³. Add the unrounded figures when the sections use the same aggregate. Calculate the base and surface separately if their gradations or depths differ. For delivery planning and gravel-specific depth examples, use the gravel calculator. Get the seller’s loose delivery weight, and keep the finished depth in your notes when comparing quotes.

Patio Base and Bedding

A patio can need granular base, bedding sand and joint material. Enter each footprint and thickness as a separate quantity. A 12 × 12 ft patio with a 4-inch base takes 1.78 yd³ of finished base, and an illustrative 1-inch bedding layer takes 0.44 yd³. Use the paver base calculator to compare the two layers side by side. Check where the base extends beyond the paving edge before taking off quantities. For polymeric joints, use the product’s bag coverage for the actual paver dimensions and joint width. Bedding volume does not predict joint fill.

Garden Beds and Borders

Measure a raised bed from the inside faces and subtract space you intend to leave below the rim. A 4 × 8 ft bed filled to 10 inches takes 26.67 ft³. At 2 ft³ per bag that is 14 bags. For several identical beds, enter their count under Order options and let the tool round once at the order total. A separate 2-inch mulch layer over that footprint takes 5.33 ft³. The soil calculator is useful when comparing garden mix with topsoil, especially if a supplier quotes delivery by weight. A short top-up of an existing bed only needs the depth being added.

Material Density and Bag Size

These figures are editable planning values from the material selector. Ask the supplier for weight per cubic yard for the delivered product, especially for damp sand or screened soil. A US short ton equals 2,000 lb. Product labels that give liters or cubic feet describe volume, which lets you compare bags directly without guessing density.

Material Planning weight per yd³ Short tons per yd³
Gravel 2,800 lb 1.40
Sand 2,700 lb 1.35
Topsoil 2,200 lb 1.10
Wood mulch 700 lb 0.35
River rock 2,700 lb 1.35
Garden soil 1,800 lb 0.90
Compost 1,200 lb 0.60

Common Questions

How many square feet does a cubic yard cover?

A cubic yard covers 162 ft² at 2 inches, 108 ft² at 3 inches, or 81 ft² at 4 inches. The coverage assumes even thickness. Mark and measure low spots separately if you need to fill them before spreading an even finish layer.

How many tons are in a yard of gravel?

With the calculator’s gravel preset, one cubic yard weighs 1.4 US short tons. If your supplier gives a different density, divide their pounds per cubic yard by 2,000. Use the original volume when checking material coverage.

How many half-cubic-foot bags equal a cubic yard?

A cubic yard contains 27 ft³, so exactly 54 bags of 0.5 ft³ make a yard. For 1.25 yards, divide 33.75 ft³ by 0.5 and round the 67.5 up to 68 bags.

What if the ground has uneven depth?

Divide the site into areas with similar depths and estimate each separately. A smooth taper between two levels can use the average thickness, provided the run and width are reasonably uniform. Save distinct sections if they use different materials or have different delivery locations.

How much extra material should I order?

Check how your seller quotes loose delivery against the compacted layer required for the job. Add a measured allowance for irregularities, settlement, or handling once. A 10% addition multiplies quantity by 1.10. If a product loses 10% of its loose volume, divide the required finished volume by 0.90 instead.

See the calculation methods and unit references.

All Bulk Calculators

Gravel & stone

Soil & lawn

Patio & deck

Volume & area

Your project list

Estimates saved on this device