How we calculate

Each tool uses the dimensions you enter and displays its working calculation. Unit conversions are fixed. Material properties and ordering allowances are editable assumptions.

Units and geometry

Length is normalized to feet and area to square feet. Rectangles use length 脳 width, triangles use base 脳 perpendicular height 梅 2, and circles use 蟺 脳 radius虏. Volume is area multiplied by depth.

The conversion definitions follow the NIST Guide for the Use of the International System of Units.

Bulk density

The starting values are approximate planning assumptions in pounds per cubic yard. Gravel starts at 2,800, pea gravel at 2,600, sand at 2,700, topsoil at 2,200, compost at 1,200 and wood mulch at 700. These values can differ substantially by moisture, grading, compaction and supplier. Replace them with your delivered material鈥檚 bulk density when ordering by weight.

Extra volume and compaction

An entered 15% allowance multiplies measured volume by 1.15. If a material instead shrinks by 15% from its loose volume, the required loose volume is the finished volume divided by 0.85, equivalent to a 17.65% added-volume allowance. Paver Base applies the allowance to gravel and computes sand as a separate layer.

Product quantities

Bags, boards, blocks, pavers, rolls and pallets round up to whole units. Intermediate calculations keep full precision. Roll and pallet results are alternative packaging quantities. Displayed truckloads use volume capacity, so a supplier must also check payload limits.

Seed, planting and wood

Grass seed rates are editable examples per 1,000 square feet. Use the exact seed label for your species, blend and planting method. Plant spacing counts centers inside a half-spacing edge margin. A full cord uses 128 cubic feet of neatly stacked wood. Face cords use a 32-square-foot face and the entered log length.

Decks, paving and walls

Straight decking counts rows and rounds up stock boards within each row. Offcuts are not reused across rows. Diagonal decking is an area-based purchase estimate. Retaining Wall counts full block courses, adds buried courses and estimates a rectangular backfill region. These calculators do not determine structural design or fastening compliance.

Useful product references

Product references help you choose inputs. BulkCalc does not claim supplier certification or professional review of individual projects.

Your project list

Estimates saved on this device