Calculation method
Larger stones need enough layer depth to cover the ground between individual pieces. The selected size presets update the layer depth. Check the actual stone dimensions and test a small coverage area before a large order.
A worked example
A 100 ft² bed at 3 inches needs 0.93 yd³ before allowance. Landscape fabric covers the measured 100 ft² plus your chosen overlap.
How to Use the River Rock Calculator
Measure the inside boundaries of the bed and subtract islands where stone will not be placed. Choose Known area for the net footprint of an irregular bed. Enter the finished layer depth from the product’s coverage guidance. Larger pieces can need more depth to conceal the base, and a thin layer may show gaps even when its volume is correct. Use the delivered stone density when converting from yards to tons. Compare that weight with what the supplier can deliver to each unloading location. Open Order options to set a labeled bag size, a bulk price or an allowance for an irregular edge.
Dry Creek Beds
Break a winding channel into stretches with similar width and depth. A 24 ft section averaging 3 ft across has about 72 ft² of plan area. A uniform 3-inch layer there uses 18 ft³, or two thirds of a cubic yard. If the channel has sloping banks that also receive stone, measure the bank surfaces along their slope and estimate them separately. Exclude isolated boulders only where they occupy the full measured layer. A design with large accent rocks and small infill needs two separate orders. Use the landscape rock calculator to compare the infill grade against a lighter decorative alternative without changing the footprint.
Foundation Borders
Measure from the planned inside of the edge restraint toward the house, leaving out walkways, steps and existing equipment pads. A 4 ft wide, 30 ft long strip uses about 1.11 yd³ at 3 inches. An inset 2 × 6 ft pad within that rectangle removes 12 ft² and changes the order to 1 yd³. Keep the stone finish clear of drainage openings and follow the planned grade away from the building. If the bed uses fabric, buy enough to overlap adjacent sheets and trim around obstacles. Fabric is measured by area, so the square yard calculator is useful for comparing area-based fabric quotes.
Around Trees and Shrubs
Lay out the border in the field before taking measurements. For a ring measuring 8 ft across with a 2 ft clear center, subtract the center circle to get about 47.12 ft². At 2 inches deep that takes 7.85 ft³ or 16 bags of 0.5 ft³. Keep the clear zone and depth appropriate for the planting. For a planting where soil moisture and a changeable bed edge matter, estimate a separate organic surface using the mulch calculator. Check both the delivered weight and whether a wheelbarrow can reach the bed without routing across a finished patio.
River Rock Coverage by Layer Depth
Coverage assumes an even thickness before extra material. The last column is a geometric conversion, so it applies to a bag sold by volume. A bag sold by weight needs an actual yield or a weight-to-volume estimate from density.
| Layer | Area per cubic yard | Area per 0.5 ft³ bag |
|---|---|---|
| 2 in | 162 ft² | 3 ft² |
| 3 in | 108 ft² | 2 ft² |
| 4 in | 81 ft² | 1.5 ft² |
| 5 in | 64.8 ft² | 1.2 ft² |
Planning Delivery and Handling
Round stone in bags can make a short border easier to load and move. Bulk may suit a long bed if a truck can drop near the work. A dense half-yard load can weigh 1,350 lb at the modeled density. Check a vehicle’s available payload before pickup, and ask the supplier to quote for the specific gradation after you settle the depth. Record the location of each stockpile so larger accents stay separate from infill.
Common questions
How many tons are in one yard of river rock?
At the model’s planning density of 2,700 lb/yd³, one yard weighs 1.35 US short tons. Rounded stones of different sizes can pack differently. Check what the yard actually weighs before setting a pickup quantity.
How many bags of river rock cover 50 square feet at 3 inches?
The bed takes 12.5 ft³, so 25 bags of 0.5 ft³ cover it before extra material. If the actual bag lists a different volume, divide 12.5 by that volume and round up. A thick inner edge or uneven base will need more stone.
Does stone size affect coverage?
Yes. A deeper layer is generally needed for larger stones. The calculator estimates bulk volume, including voids between stones.
How much landscape fabric is needed?
Start with the measured area shown in the result and add the overlap and edge allowance specified by the fabric manufacturer.
Can I order by the ton?
The result includes US short tons. Replace the default density with the supplier’s density for the stone you choose.