Landscape Rock Calculator

Compare the weight and quantity of decorative rock for the same landscape bed.

Your measurements

Order options

Your estimate

Live calculation
1.85yd³

Measured quantity · no extra allowance

Order volume50 ft³
Estimated weight2.5 US tons
Whole bags100 0.5 ft³

Calculation & all units

200 ft² × 3 in ÷ 324 × 1 = 1.85 yd³

Order volume
50 ft³
Estimated weight
2.5 US tons
Whole bags
100 0.5 ft³
Area
200 ft²
Measured volume
1.8519 yd³
Metric volume
1.4158 m³
Metric mass
2,267.9619 kg
Volume-based truckloads
1 loads
Measurement planDimensions in feet
A dimension guide for your estimate
Estimate1.85 yd³View result

Calculation method

A cubic yard of lava rock can weigh much less than a cubic yard of dense stone. Changing the material updates weight while keeping your measured volume fixed. Bag counts depend on whether the bag is sold by weight or volume.

Bulk weight in short tons = order volume in yd³ × selected density ÷ 2,000.

A worked example

One cubic yard at 1,000 lb/yd³ is 0.50 short tons. At 2,700 lb/yd³, the same volume is 1.35 short tons.

How to Use the Landscape Rock Calculator

Measure only the surface receiving decorative rock. For a rectangle use its length and width, for an island use its diameter, and for an irregular bed enter the measured area. Enter the depth you plan to spread and select the closest material for a first estimate. Use the supplier’s weight per yard when comparing prices per short ton. If a product comes in bags, enter each bag’s volume or weight under Order options. The order volume does not change when you swap materials. The weight, weight-based bag count and costs quoted per ton can change markedly.

Front Yard Rock Gardens

Sketch the border around planted islands and paved strips before counting the stone. A 15 × 18 ft area with 50 ft² reserved for planting gives 220 ft² for rock. At 2.5 inches it needs about 1.70 yd³. If the planting islands are also covered, include them only to the extent that the material and layer are the same. A light lava rock grade can create the same covered area as granite chips with a substantially lighter delivery. Compare sample sizes and coverage guidance on the actual substrate. If the planting islands use compost, estimate that amendment separately with the compost calculator rather than including it in the decorative stone volume.

Accent Bands and Color Changes

Count decorative bands by their separate widths and runs. An 18-inch band along a 32 ft curb is about 48 ft². At a 2-inch depth it needs 8 ft³, which equals 16 half-cubic-foot bags. If two colors alternate, build two totals from their measured runs and round bags for each color. A small repeatable batch can help keep contrast consistent through multiple drops. On a curve, measure the length along the middle of the band to avoid applying the longer outer run to the full width. For a rounded accent grade, compare the product and area under the river rock calculator.

Rock Replacement and Top-Ups

Check the existing layer in several places before measuring a refill. If a bed has 1 inch of rock left and needs 3 inches after spreading, enter the additional 2 inches. A top-up over 90 ft² then uses 15 ft³ or about 0.56 yd³. A badly mixed or buried finish may instead require clearing and a full replacement, which changes the measured depth. Pay attention to the parts visible from the curb and match grain size before ordering. If the original layer has sunk mostly along one edge, measure that strip on its own to avoid buying a full-depth replacement across the bed.

Landscape Rock Density Reference

These are the calculator’s planning values, in loose pounds per cubic yard. The texture and mix of sizes determine bag coverage and how much of the surface shows through. The table helps compare loading weight for the same volume.

Material Weight per yd³ US short tons per yd³
Lava rock 1,000 lb 0.50
River rock 2,700 lb 1.35
Granite chips 2,800 lb 1.40
Marble chips 2,700 lb 1.35

Comparing Bulk and Bag Quotes

To compare pickup prices, convert bags to actual cubic feet and include the package rounding in the total cost. Buying three extra bags for a matching touch-up can make sense when color lots vary. If two suppliers use different stone names, use their sample and quoted size range to check that the rock will look and spread the same way.

Common questions

How much landscape rock covers 200 square feet at 2 inches?

The volume is 33.33 ft³, or 1.23 yd³. If you use 0.5 ft³ bags, round up to 67 bags before extra material. If the quote is per ton, enter the density of the rock you selected before pricing it.

Can I use a 40 lb bag to measure area coverage?

Convert the weight to volume using the product yield. For example, at 2,700 lb/yd³ a 40 lb bag is about 0.4 ft³. That covers about 2.4 ft² at 2 inches. Check a listed coverage figure first because products of the same bag weight can have different yields.

Why does the weight change when I switch material?

Bulk density differs by rock type and void space. The area and layer depth still determine the same required volume.

Can I calculate marble chips?

Yes. Choose Marble chips, then adjust its density to match the supplier specification.

Is the coverage exact?

Coverage varies with particle size, irregular ground and the depth actually installed. Use a measured average depth and a suitable allowance.

More bulk & landscape calculators

Browse full directory ↗

Your project list

Estimates saved on this device