Limestone Calculator

Calculate crushed limestone volume, weight and bags for outdoor construction.

Your measurements

Order options

Your estimate

Live calculation
2.47yd³

Measured quantity · no extra allowance

Order volume66.67 ft³
Estimated weight3.46 US tons
Whole bags134 0.5 ft³

Calculation & all units

200 ft² × 4 in ÷ 324 × 1 = 2.47 yd³

Order volume
66.6667 ft³
Estimated weight
3.4568 US tons
Whole bags
134 0.5 ft³
Area
200 ft²
Measured volume
2.4691 yd³
Metric volume
1.8878 m³
Metric mass
3,135.9472 kg
Volume-based truckloads
1 loads
Measurement planDimensions in feet
A dimension guide for your estimate
Estimate2.47 yd³View result

Calculation method

This tool estimates crushed limestone aggregate. Use the compacted design depth and supplier density for the selected grade. Agricultural lime application depends on a soil test and is outside this aggregate calculation.

Limestone short tons = area × depth in inches ÷ 324 × density ÷ 2,000.

A worked example

A 100 ft² area at 4 inches is 1.23 yd³. At 2,800 lb/yd³, the estimated weight is 1.73 short tons before allowance.

How to Use the Limestone Calculator

Measure the area to receive crushed aggregate and enter the intended layer depth. Choose Known area if a drawing gives an area but the outline cannot be represented by a single shape. Confirm the grade, then enter its delivered density under Order options. The default 2,800 lb per cubic yard is useful for estimating when no quote is available yet. Use cubic yards to plan coverage and tons for a weight quote. Check the bag label to see whether it gives pounds or cubic feet. A weight-based count uses the density, while a volume-based count uses the labeled volume directly.

A Compacted Driveway or Parking Bay

Measure a driveway and its parking bay separately if they differ in width or depth. A 14 × 30 ft bay at a finished depth of 4 inches needs about 5.19 yd³. With a supplier-recommended 12% addition, that becomes 5.81 yd³ of loose material. At the default density, the loose order is about 8.13 short tons. Check whether the crushed limestone grade contains fines for compaction and confirm the target depth from the plan. If a different aggregate sits underneath, take off its quantity with the crushed stone calculator. Keep both finished thicknesses and loose order allowances on the quote.

Screenings for a Leveling Layer

Use this volume method for crushed limestone screenings when the design permits that specific product. A 9 × 16 ft rectangle at an even 1½ inches uses 18 ft³, or 0.67 yd³. Measure low spots separately so you can distinguish patch fill from a uniform finishing layer. For paving, follow the specified bedding material and depth. A system that calls for sand may specify grading and drainage behavior that screenings do not provide. The paver sand calculator estimates bedding and jointing sand for those designs. Buy screenings by volume if you can verify the bucket size, or use the supplier’s density for a weight quote.

Limestone Chips in a Decorative Border

Measure the width within the edge restraint. A 2.5 ft wide band along a 42 ft path has 105 ft² of coverage. At 2 inches, it needs 17.5 ft³. The volume is equivalent to 35 bags of half a cubic foot before extra material. If there are larger corner beds, measure them separately and add their volumes before rounding. Decorative grades are often sold in bags by weight, which can have different yields for different chip sizes. If your design has equal areas of two colors, record them as separate line items to avoid buying excess of one color while running short of the other.

Limestone Coverage Across Common Depths

The table assumes an even finished layer. Actual depth comes from your installation plan. Contact the seller for the loose density and the specific yield of bagged aggregate when converting to a purchase quantity.

Depth Coverage per yd³ Volume for 100 ft²
1½ in 216 ft² 0.46 yd³
2 in 162 ft² 0.62 yd³
4 in 81 ft² 1.23 yd³
6 in 54 ft² 1.85 yd³

Estimating an In-Place Top-Up

On an existing driveway, measure the volume needed to restore the grade rather than pricing the original full base. If only wheel ruts need material, measure their combined widths and representative depths separately. Add a thin uniform finish afterward only if you intend to cover the whole bay. A seller can suggest a compatible gradation for the existing surface and quote the smaller loose-load minimum.

Common questions

How many tons are in a cubic yard of crushed limestone?

At 2,800 lb/yd³, one yard weighs 1.40 US short tons. If your aggregate dealer quotes 3,000 lb/yd³ for a grade with fines, use 1.50 short tons per yard. Ask about moisture and loading if the estimate is close to a transport limit.

How many bags of limestone chips cover 75 square feet at 2 inches?

You need 12.5 ft³. At 0.5 ft³ per bag the order is 25 bags before adding any allowance. Use the manufacturer’s yield if a bag only lists its weight and the distributor sells chips in multiple grades.

Which density should I use?

Use the loose bulk density supplied for your grade, moisture level and delivery condition. The initial value is an estimate.

Can I calculate agricultural lime?

This tool measures aggregate volume. For agricultural lime, obtain the application rate from a soil test and the product label.

Can I enter a known area?

Choose Known area and enter square feet, square meters, square yards or acres, together with layer depth.

More bulk & landscape calculators

Browse full directory ↗

Your project list

Estimates saved on this device