Square Yard Calculator

Calculate area in square yards, square feet, square meters and acres.

Your measurements

Order options

Your estimate

Live calculation
22.22yd²

Horizontal footprint

Square feet200 ft²
Square meters18.58 m²
Acres0.00459 acres

Calculation & all units

200 ft² ÷ 9

Square feet
200 ft²
Square meters
18.5806 m²
Acres
0.00459 acres
Measurement planDimensions in feet
A dimension guide for your estimate
Estimate22.22 yd²View result

Calculation method

Choose a rectangle, circle, triangle or known area. Measure the horizontal footprint. For different sections, save separate estimates to your project list. Price uses the area unit selected in the order options.

Square yards = square feet ÷ 9. Acres = square feet ÷ 43,560.

A worked example

A 12 × 15 ft rectangle has an area of 180 ft², or 20 yd².

How to Use the Square Yard Calculator

Choose the plan shape and enter the dimensions in the units you measured. A rectangle uses length and width. A triangle uses the length of its base and the distance perpendicular to it. A circle uses its full diameter. Choose Known area if a plan or a prior measurement gives the net area directly. Read square yards, square feet and square meters in the result. Enter a price and its area unit under Order options if you need an area-based quote. For multiple identical sections, enter their count once. Confirm the footprint against the surface that the installer or supplier actually measures.

Comparing Turf and Fabric Quotes

A 24 × 36 ft rectangle is 864 ft², or 96 yd². An excluded strip of 72 ft² reduces it to 792 ft², or 88 yd². Use this net area to compare an area quote, and confirm whether it already includes cuts or overlap. Each quote must use the same unit and measured scope. A $4.50 per square yard quote corresponds to $0.50 per square foot. For material sold by roll, use the sod calculator with the net turf area and actual roll dimensions. Landscape fabric may need seams, overlaps and extra width that an area measurement does not include.

Measuring Walks and Irregular Patios

Break the outline into simple shapes on a sketch. A 10 × 14 ft patio body with a separate triangle 8 ft across its base and 6 ft high has 164 ft² overall, or about 18.22 yd². When shapes overlap, count the shared area once. For a curved surface, measure small rectangular or trapezoid strips, then add the estimates as a known area. Keep a sketch of each piece so another person can confirm where the boundary runs. Use the paver calculator when turning the square footage into a piece count with room for cuts and package rounding.

Checking a Supplier’s Plan Measurement

Compare the visible dimensions from the same drawing that the supplier used. A 5 yd × 8 yd surface is 40 yd², or 360 ft². Entering 5 and 8 as feet would give only 40 ft². If one segment is taken from a metric drawing and another is measured in feet, enter each unit beside its measurement. Ask which sections were included if the quote measures more than your footprint. One party may include base extending past the edge or full boards cut at the boundary. When the quote is really for loose material placed at a specified depth, switch to the cubic yard calculator after verifying the area.

Square Yard and Square Foot Equivalents

Each dimension in a yard-by-yard square is 3 feet, so the area has nine square feet. The same factor applies to any shape when converting the measured area. Convert quantities to one unit before adding separate pieces.

Area in square feet Equivalent square yards
9 1
90 10
100 11.11
450 50
900 100
1,000 111.11

Planning Overlap for Sheet Materials

The measured area gives you the surface, but roll widths, seam placement and overlap affect the purchased area. A sheet that must overlap a neighbor by six inches loses that width from its new coverage. Lay out strips on a sketch and count their full purchase lengths. One large sheet may use fewer square yards than several narrow pieces even when they cover the same footprint. Keep the quote’s cut width and measured surface area as separate quantities.

Common questions

How many square yards are in a 20 × 30 ft area?

Multiply the feet to obtain 600 ft², then divide by nine. The result is about 66.67 yd². For pricing, carry the unrounded area through to the cost and round the final quote as needed.

How do I convert a price per square foot to a price per square yard?

Multiply the square-foot price by nine, since the yard covers nine square feet. For example, $2.50 per ft² is equivalent to $22.50 per yd². The total cost should agree after converting the area in the opposite direction.

How many square yards are in a metric area?

One square yard is 0.83612736 m². Divide square meters by that factor to get square yards. For a 50 m² surface the result is about 59.80 yd². Use square meters in the Known area input to perform the conversion directly.

Is square yard the same as cubic yard?

Square yards measure area. Cubic yards measure volume, which also needs a depth.

Can I calculate a circle?

Enter the diameter. The area uses π × (diameter ÷ 2)².

How do I measure a triangular section?

Enter the base and its perpendicular height. The area is half their product.

More bulk & landscape calculators

Browse full directory ↗

Your project list

Estimates saved on this device