Calculation method
Choose the thickness you intend to add, rather than the entire cultivated depth when amending existing soil. Compost bulk density varies with moisture and screening. Weight estimates use the editable density.
A worked example
A 100 ft² bed with a 2-inch compost layer needs 16.67 ft³, or 17 one-cubic-foot bags before allowance.
How to Use the Compost Calculator
Determine the square footage that needs compost and enter the actual thickness of compost to spread. If your plan calls for blending compost into a deeper soil layer, use the thickness of compost before mixing. For a uniform rectangle use the inside length and width. For a group of irregular beds, add their net areas before entering Known area. Select a bag size or bulk quote under Order options. The default density is 1,200 lb per cubic yard. If you purchase by weight, ask the seller for the value for their finished product with its current moisture content.
Topdressing Existing Turf
Measure only the turf receiving the treatment. A 1,200 ft² lawn dressed with a quarter inch of compost needs 25 ft³, or about 0.93 yd³. Work in measured sections if the lawn has thin patches and areas that can be left alone. A thin and consistent application is easier to spread than a pile placed in the middle of soft turf. Check the product’s screening size and intended use. Batches containing large pieces can be awkward to spread over closely trimmed turf. If the project also includes overseeding, use the grass seed calculator for seed quantities and your preferred product coverage.
Preparing a Vegetable Bed
Use a soil test and the project’s planting plan to choose how much amendment to add. An example 4 × 20 ft bed with a 1-inch compost application takes 6.67 ft³. If you intend to mix this through 6 inches of existing soil, enter one inch in the calculator. Entering six inches would price a full replacement layer. Work from the planned finished area, removing stepping stones and unused rows. If the job also includes filling a new raised bed to the rim, estimate that volume with the soil calculator before allocating part of the fill as compost.
Allocating Compost in a Custom Mix
If a plan calls for one part compost to three parts other ingredients by volume, compost makes up one quarter of the total measured batch before mixing. A 64 ft³ batch therefore uses 16 ft³ of compost. A 2 ft³ bag count is eight. Mixing and settling can affect the finished volume, so check the final fill height after placement. Price each ingredient separately and record the mix ratio in the order notes. For a supplier selling by a fraction of a yard, use the cubic feet to cubic yards converter to quote 16 ft³ as about 0.59 yd³.
Compost Coverage and Bag Counts
The table compares depths across a 100 ft² bed. Counts round up to a whole bag before optional allowance. If transport matters, a cubic yard at the default density is 600 lb per half yard. Ask the producer whether quoted bag sizes represent loose or compressed volume.
| Spread depth | Volume per 100 ft² | Bags at 1 ft³ |
|---|---|---|
| ¼ in | 2.08 ft³ | 3 |
| ½ in | 4.17 ft³ | 5 |
| 1 in | 8.33 ft³ | 9 |
| 1½ in | 12.50 ft³ | 13 |
| 2 in | 16.67 ft³ | 17 |
Checking the Seller’s Minimum Load
Some bulk yards sell partial scoops. Others set a delivery minimum that can be more than a single small bed needs. Compare the full delivered quote with the cost of the necessary whole bags and plan a suitable place to spread or store any extra. The same material can serve several beds if their measured application rates match.
Common questions
How much compost covers 500 square feet at 1 inch?
The layer takes 41.67 ft³, or about 1.54 yd³. One-cubic-foot bags round up to 42. If you are treating several beds with the same product, add the unrounded volumes and round bags at the combined total.
How many tons are in a cubic yard of compost?
At 1,200 lb/yd³ the estimate is 0.60 US short tons per cubic yard. Finished compost may arrive with different moisture or grain size. Give the supplier your required volume and use their density if the quote is charged per ton.
Should I include compost already mixed into the bed?
Measure the quantity you plan to add now. A bed with enough soil volume may need only an amendment layer. Measure that layer and leave the underlying soil out of the new order. If the planned blend is sold premixed, calculate the full quantity as that mix instead.
How much for a thin lawn topdressing?
Enter the lawn area and the thin applied depth. At 0.25 inch, a cubic yard covers 1,296 ft² before allowance.
Do I enter the mixing depth?
Enter the thickness of new compost being added. For a percentage blend, multiply the total soil volume by the desired compost proportion.
Can I use weight-labelled bags?
Select lb for Bag size. The count will use the bulk density you specify.