Sod Calculator

Calculate turf area, rolls and pallets after removing unplanted areas.

Your measurements

Order options

Your estimate

Live calculation
210ft² of sod

Rolls and pallets are alternative order quantities

Rolls21 rolls
Pallets1 pallets
Net lawn200 ft²

Calculation & all units

200 ft² × 1.05

Rolls
21 rolls
Pallets
1 pallets
Net lawn
200 ft²
Measurement planDimensions in feet
A dimension guide for your estimate
Estimate210 ft² of sodView result

Calculation method

Subtract paths, beds and other areas that will remain uncovered. Roll and pallet sizes vary by grower. Enter their actual coverage, then apply a cutting allowance that suits the layout.

Order area = (measured area − excluded area) × (1 + waste ÷ 100). Rolls and pallets round up separately.

A worked example

A 1,000 ft² lawn with 100 ft² excluded and 5% waste needs 945 ft². That is 95 rolls at 10 ft² each, or 2 whole 500-ft² pallets.

How to Use the Sod Calculator

Measure the turf footprint after the bed edges and hardscape are marked. Choose the outer shape and use Exclude area to take out pads, trees, beds, and other surfaces that will not receive sod. Check that the excluded area uses the correct unit. Set the amount of extra sod for cuts in Order options. Enter how many square feet one roll and one pallet actually cover for the selected product. The calculator reports rolls and pallets as alternative order sizes. Ask the farm whether partial pallets or individual rolls are offered, and round only for the packaging you will buy.

Replacing a Rectangular Front Lawn

A front lawn measures 30 × 42 ft at the edge of the sidewalk. A 4 × 18 ft planting strip within that outer area removes 72 ft², leaving 1,188 ft². A 5% allowance gives 1,247.4 ft². With rolls that cover 10 ft² each, this is 125 rolls. A supplier with 500 ft² per pallet may quote two complete pallets plus enough rolls to cover the balance if it sells split orders. Sketch the roll direction and keep cuts for the final row where they can be reused. Use the topsoil calculator separately for grade preparation, using the area where soil is actually placed.

Laying Turf Around Curves and Islands

Map curves as smaller measured shapes or take the area from a site plan. A circular island 14 ft across has about 154 ft². Subtract it if that area lies entirely within the lawn outline. Leave the finished edge slightly adjustable when taking measurements so the installer can mark a workable curve and use longer cuts. A winding border creates more cut pieces than a plain rectangle. Plan which pieces can be reused before deciding on an allowance. The square yard calculator is useful when the supplier quotes coverage in square yards or you need to convert a separate irregular section.

Patching a Damaged Strip

Measure back to sound turf after defining a clean repair edge. For two strips totaling 135 ft² with a 5% allowance, order at least 141.75 ft². Rolls rated at 8 ft² round up to 18. If they are sold individually, a full 450 ft² pallet may leave material you cannot use promptly. Match the existing turf type and verify the package dimensions for your delivery. Narrow repairs also depend on the shape of each piece. A roll that provides enough area might still require an awkward seam along a curb. For portions that can be seeded, estimate those separately with the grass seed calculator.

Sod Roll and Pallet Sizes

The following package sizes are examples. Use the numbers from the sod farm, which can depend on the cut style and turf. The order quantities are separate ways to buy 945 ft² of turf after allowance. Ask whether the supplier has a minimum quantity or sells single rolls beyond a full pallet.

Package Example coverage Packages for 945 ft²
Small roll 8 ft² 119
Standard roll 10 ft² 95
Larger roll 12 ft² 79
Pallet 450 ft² 3
Pallet 500 ft² 2

Common questions

How many rolls of sod do I need for 1,000 square feet?

With 10 ft² per roll and no allowance, buy 100 rolls. Five percent extra brings the order to 105 rolls. Where part of the measured area is a bed or sidewalk, subtract it before applying the allowance.

How many square yards are on a 500-square-foot pallet?

Divide 500 by 9 for 55.56 yd². If your plan is measured in square yards, convert it to square feet before comparing package sizes, or select square yards as the input unit when entering the known area.

Can I combine pallets and loose rolls?

If the supplier offers both, subtract the area covered by complete pallets from the adjusted order area. For 1,230 ft², two 500 ft² pallets leave 230 ft². At 10 ft² per roll that is another 23 rolls. Confirm that all packages are the same turf variety.

Should I order the rolls and pallets together?

They are alternative order formats for the same area. Choose the one your supplier sells.

How do I account for curved edges?

Use an appropriate waste percentage for the cuts required. Split irregular areas into measurable sections.

What does a pallet cover?

Use the coverage supplied by your grower. The default 500 ft² can be edited.

More bulk & landscape calculators

Browse full directory ↗

Your project list

Estimates saved on this device